Skip to content

Perfect Transfer Kit Uno / Duo (Closed Transfer)

459,00 kr
Variant
73 in stock.

Perfect Transfer Kit Uno / Duo (Closed Transfer)

Perfect Transfer Kit is a complete kit for those who want to move your already carbonated beer.
Tex between fermentasaurus to corneli fate. Or between 2 yeast tanks.

The only thing you need to complement with is a carbonic kit (eg this) and carbon acid container. Available as a variant to choose for those who do not already have carbonic kits at home.


The variant UNO is to fill 1 barrel.
The variant Duo is to fill 2 barrels in series.



Perfect Transfer Kit Uno comes with:

Closed Transfer Kit.
Little boy for flow control.
Bottle for reading flow speed.

 

Instruction Perfect Transfer Kit Uno:
Start by flushing the disinfectant through all hoses.
Then push it with carbonic acid so that all air is gone.
To get as oxygen-free as possible, receiving vessels should have been filled with disinfectants printed surface with CO2 so that the entire vessel contains carbonic acid.
Pressure the receiving vessel with the same pressure CO2 You have in vessel 1.
Then switch the gas back on vessel 1.
Connect the long hose between vessel 1s Beer post and vessel 2s beer post (received vessels)
Switch the little boy on vessels 2s gas post and place the thin hose from the little boy into the bottle that you filled half with water. Glent gently on the lighter valve to start the transmission. Read the flow on the activity in the bottle (bubbling). The bottle is placed in a bucket so you do not have a beer on the floor if you would overfill the barrel. When the barrel is filled, disconnect and flush all hoses with disinfectants.


Perfect Transfer Kit Duo comes with:
Closed Transfer Kit.
Tamden Keg Transfer Kit (linked between 2 barrels of gas-fluid)
Little boy for flow control.
Bottle for reading flow speed.

Instruction Perfect Transfer Kit Duo:
Start by flushing the disinfectant through all hoses.
Then push it with carbonic acid so that all air is gone.
To get as oxygen-free as possible, receiving vessels should have been filled with disinfectants printed surface with CO2 so that the entire vessel contains carbonic acid.
Pressure the receiving vessel with the same pressure CO2 You have in vessel 1.
Then switch the gas back on vessel 1.
Connect the short hose between vessels 2 and 3. vessels 2s gaspost to vessel 3s beer post.
Connect the long hose between vessel 1s Beer post and vessel 2s beer post (received vessels)
Switch the little boy on the vessel 3s gas post and place the thin hose from the little boy into the bottle you filled to half with water. Glent gently on the lighter valve to start the transmission. Read the flow on the activity in the bottle (bubbling). The bottle is placed in a bucket so you do not have a beer on the floor if you would overfill the barrel. When the barrels are filled, disconnect and flush all hoses with disinfectants.

* Stumps, leaves, barrels & yeasts seen on the pictures are not included, just that listed above.

Want another connection in any of the ends so feedback with us so do we fit to you.